Introduction to the installation of hinge hinges
Release time:
Jun 12,2025
Before installation, it is necessary to check whether the hinges match the door and window frames and sashes.
There are 6 key points to pay attention to when installing door hinges:
1. Before installation, it is necessary to check whether the hinges match the door and window frames and sashes.
2. Check if the hinge slot matches the hinge height, width, and thickness.
3. Check whether the hinge and its connecting screws and fasteners are compatible.
4. The connection method of hinges should match the material of the frame and leaf. For example, the hinges used in steel frame wooden doors are welded on one side connected to the steel frame and fixed with wooden screws on the other side connected to the wooden door leaf.
5. In the case of asymmetric hinge panels, it is necessary to distinguish which panel should be connected to the fan, which panel should be connected to the door and window frame, the side connected to the third section of the shaft should be fixed to the frame, and the side connected to the two sections of the shaft should be fixed to the frame.
6. During installation, it should be ensured that the axis of the hinges on the same panel is on the same vertical line to prevent the door and window panels from warping.
Key words:
Previous Page:
Blog